SN74ALVCH16820DL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G56 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | ALVC/VCX/A |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 4.8ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 5.9 ns |
| Height Seated (Max) | 2.79mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
SN74ALVCH16820DL Overview
56-BSSOP (0.295, 7.50mm Width)is the way it is packaged. A package named Tubeincludes it. Tri-State, Non-Invertedis the output configured for it. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 1.65V~3.6Vis used as the supply voltage. It is operating at a temperature of -40°C~85°C TA. This D latch has the type D-Type. It belongs to the 74ALVCHseries of FPGAs. Its output frequency should not exceed 150MHz. There are 1 elements in it. As a result, it consumes 40μA of quiescent current without being affected by external factors. It has been determined that there have been 56 terminations. Power is supplied from a voltage of 1.8V volts. The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. ALVC/VCX/Ais the family of this D flip flop. As soon as 3.6Vis reached, Vsup reaches its maximum value. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.
SN74ALVCH16820DL Features
Tube package
74ALVCH series
SN74ALVCH16820DL Applications
There are a lot of Rochester Electronics, LLC SN74ALVCH16820DL Flip Flops applications.
- ATE
- Communications
- Matched Rise and Fall
- Guaranteed simultaneous switching noise level
- Frequency Dividers
- Frequency Divider circuits
- Safety Clamp
- Parallel data storage
- Supports Live Insertion
- CMOS Process
