SN74ALVCH16821DLR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Supplier Device Package | 56-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 1.65V~3.6V |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Clock Frequency | 150MHz |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
SN74ALVCH16821DLR Overview
The item is packaged in 56-BSSOP (0.295, 7.50mm Width)cases. You can find it in the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger is configured to use Positive Edge. There is an electronic component mounted in the way of Surface Mount. A 1.65V~3.6Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74ALVCHseries of FPGAs. It should not exceed 150MHzin terms of its output frequency. In total, there are 2 elements. It consumes 40μA of quiescent current without being affected by external factors. Its input capacitance is 3.5pF farads.
SN74ALVCH16821DLR Features
Tape & Reel (TR) package
74ALVCH series
SN74ALVCH16821DLR Applications
There are a lot of Rochester Electronics, LLC SN74ALVCH16821DLR Flip Flops applications.
- Individual Asynchronous Resets
- ESD performance
- Storage registers
- Asynchronous counter
- Matched Rise and Fall
- Counters
- Single Up Count-Control Line
- Shift Registers
- Synchronous counter
- QML qualified product
