SN74ALVCH16825DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCH16825 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 3.4 ns |
| Quiescent Current | 40μA |
| Turn On Delay Time | 6 ns |
| Family | ALVC/VCX/A |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 9 |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 18 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVCH16825DGGR Overview
Logical driver uses a neat 56-TFSOP (0.240, 6.10mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~3.6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74ALVCH series devices. 56 terminations with different functions. Buffer IC reuqires a supply voltage of 1.8V. This electronic component belongs to the ALVC/VCX/A family. 56 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 56 pins. Enhanced with 2 ports. The bus transceiver employs 9 bits for each element. You can search "74ALVCH16825" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 40μA. It is recommended to use a 3.3V power supply. It is generally sold in TR package. To supply the device, a minimum voltage of 1.65V is a must. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. Because of its 18 lines level input capability, buffer IC is more cost-effective on transimitting signals.
SN74ALVCH16825DGGR Features
Bus Driver/Transceivers
WITH DUAL OUTPUT ENABLE
SN74ALVCH16825DGGR Applications
There are a lot of Texas Instruments SN74ALVCH16825DGGR Buffers & Transceivers applications.
- Optical sub-assembly (OSA)
- SONET/SDH Network
- Digital systems
- Changeing the frequency from IF to RF
- Wireless transmission
- Notebook
- Fiber distributed data interface (FDDI)
- Wired telephone
- Wireless smart house
- Wireless access points
