SN74ALVCH16835KR
| Parameters | |
|---|---|
| HTS Code | 8542.39.00.01 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ALVCH16835 |
| Pin Count | 56 |
| Number of Outputs | 18 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Circuits | 18-Bit |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 5.2 ns |
| Family | ALVC/VCX/A |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Universal Bus Driver |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Control Type | ENABLE LOW |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 59.987591mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALVCH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
SN74ALVCH16835KR Overview
It is embedded in the 56-VFBGA package. It is packaged in a way that resembles Cut Tape (CT). The superior flexibility of 18-Bit circuits is achieved through their use. This electrical device is of the Universal Bus Driver logic type. In this case, the electronic part is mounted in the direction of Surface Mount. -40°C~85°C should be higher than the operating temperature. The high/low output current of 24mA 24mA enables maximum design flexibility. It is a type of FPGA that belongs to the 74ALVCH series of FPGAs. There is a supply voltage of 1.65V~3.6V that it operates on. It belongs to 74ALVCH16835 family. In 56 terminations, a transmission line is terminated with an impedance-matched device. When the supply voltage is above 1.8V, the device will operate normally. 56 pins are present in the device. An electronic part designed with 18 Bits is used in this product. 2 terminations, on the other hand, are the practice of terminating a transmission line with a device that matches its characteristic impedance. Surface Mount is used to mount this electronic part. 56 pins are used in the design. The device belongs to the ALVC/VCX/A family of electronic devices. When Vsup reaches 3.6V, the maximum supply voltage has been reached. The supply voltage (Vsup) should be greater than 1.65V. 3.3V power supplies are used to power the device. This device is well suited for TAPE AND REEL based on its reliable performance. In Bus Driver/Transceivers, there is this part. 18 outputs are configured.
SN74ALVCH16835KR Features
56-VFBGA package
74ALVCH series
74ALVCH16835 family
56 pin count
56 pins
3.3V power supplies
18 outputs
SN74ALVCH16835KR Applications
There are a lot of Texas Instruments SN74ALVCH16835KR Universal Bus Functions applications.
- Burglar alarms and buzzers
- Circuits involving computation and processing
- Digital watch
- Embedded system
- Disk read-write IC
- Refrigerator
- Arithmetic unit
- Digital driver ICs
- Illumination
- Computer
