banner_page

SN74ALVCH16841DGGR

D-Type, Latch 1.65V~3.6V 20 Bits Tri-State Latches 74ALVCH Series 74ALVCH16841 56 Pins DUAL CMOS 56-TFSOP (0.240, 6.10mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALVCH16841DGGR
  • Package: 56-TFSOP (0.240, 6.10mm Width)
  • Datasheet: -
  • Stock: 419
  • Description: D-Type, Latch 1.65V~3.6V 20 Bits Tri-State Latches 74ALVCH Series 74ALVCH16841 56 Pins DUAL CMOS 56-TFSOP (0.240, 6.10mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-TFSOP (0.240, 6.10mm Width)
Number of Pins 56
Weight 252.792698mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74ALVCH
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 1.65V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 1.8V
Terminal Pitch 0.5mm
Base Part Number 74ALVCH16841
Pin Count 56
Output Type Tri-State
Number of Elements 2
Circuit 10:10
Polarity Non-Inverting
Supply Voltage-Min (Vsup) 1.65V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 20
Propagation Delay 5.6 ns
Turn On Delay Time 1 ns
Family ALVC/VCX/A
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW/HIGH
Power Supply Current-Max (ICC) 0.04mA
Number of Output Lines 3
Translation N/A
Height 1.2mm
Length 14mm
Width 6.1mm
Thickness 1.15mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ALVCH16841DGGR Overview


In the package 56-TFSOP (0.240, 6.10mm Width), it can be found. Cut Tape (CT) is the way in which it is packaged. In this configuration, the output is set to Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. With a supply voltage of 1.65V~3.6V, it operates. A temperature of -40°C~85°C is set as the operating temperature. The 74ALVCH series is associated with this FPGA. With this electronic part, there are 20 bits. A device with this design has 56 terminations. There is no doubt that it belongs to the family 74ALVCH16841. The supply voltage of the device is 1.8V. There are 56 pins on it. In terms of electronic devices, this one is in the ALVC/VCX/A family. 56 pins are used in its design. It is mounted according to the Surface Mount method. In this device, there are 2 ports. FF/Latches is the subcategory of this part. A supply voltage (Vsup) greater than 1.65V is required. This device is well suited for TR based on its reliable performance. Its 24mA output current allows for maximum design flexibility. Input lines are converted into binary equivalents by 3 output lines. In total, it has 2 elements. In order to operate properly, its maximum power current (ICC) should be 0.04mA.

SN74ALVCH16841DGGR Features


56-TFSOP (0.240, 6.10mm Width) package
74ALVCH series
20 Bits
74ALVCH16841 family
56 pin count
56 pins
2 elements

SN74ALVCH16841DGGR Applications


There are a lot of Texas Instruments SN74ALVCH16841DGGR Latches applications.

  • Motor Drives
  • Sample and hold register
  • Parallel-to-Serial Data Conversion
  • Automotive Infotainment
  • Automotive Cluster
  • Programmable binary
  • Shift left register
  • BCD counting
  • Hammer Device Information
  • Accumulator Registers

Write a review

Note: HTML is not translated!
    Bad           Good