banner_page

SN74ALVCH16841DL

D-Type, Latch 1.65V~3.6V 20 Bits Tri-State Latches 74ALVCH Series 74ALVCH16841 56 Pins DUAL CMOS 56-BSSOP (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALVCH16841DL
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 444
  • Description: D-Type, Latch 1.65V~3.6V 20 Bits Tri-State Latches 74ALVCH Series 74ALVCH16841 56 Pins DUAL CMOS 56-BSSOP (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Number of Pins 56
Weight 694.790113mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ALVCH
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Bus Driver/Transceiver
Technology CMOS
Voltage - Supply 1.65V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 1.8V
Frequency 10MHz
Base Part Number 74ALVCH16841
Pin Count 56
Output Type Tri-State
Number of Elements 2
Circuit 10:10
Polarity Non-Inverting
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 20
Propagation Delay 3.9 ns
Turn On Delay Time 1 ns
Family ALVC/VCX/A
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW/HIGH
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 3
Number of Output Lines 1
Translation N/A
Height 2.79mm
Length 18.41mm
Width 7.49mm
Thickness 2.59mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ALVCH16841DL Overview


In the 56-BSSOP (0.295, 7.50mm Width) package, it can be found as an embedded module. It is packaged in the way of Tube. It uses the output configuration Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. The voltage supply is 1.65V~3.6V. During operation, the temperature is set at -40°C~85°C. In the 74ALVCH series, this FPGA is located. There are 20 bits in this electronic part. As far as this device is concerned, it has no terminations. The family in which it belongs to is 74ALVCH16841. The device is operated when the supply voltage is set to 1.8V. With 56 pins, it is equipped. It is a member of the ALVC/VCX/A family of electronic devices. 56 pins are used in its design. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports that can be connected to it. This part is included in Bus Driver/Transceiver. There are 3 input lines in which electronic circuits are present. The output current of 24mA makes it feature maximum design flexibility. It follows that 1 output lines are generated from the binary equivalent of the input line. This element consists of 2. Its maximum current supply (ICC) reaches 0.04mA.

SN74ALVCH16841DL Features


56-BSSOP (0.295, 7.50mm Width) package
74ALVCH series
20 Bits
74ALVCH16841 family
56 pin count
56 pins
2 elements

SN74ALVCH16841DL Applications


There are a lot of Texas Instruments SN74ALVCH16841DL Latches applications.

  • Avionics
  • Lamp and Display (LED)
  • Automotive Body Electronics
  • Shift left register
  • Buffer register
  • Counters
  • Buffer Storage
  • Buffer/Storage Registers
  • Display
  • Relay

Write a review

Note: HTML is not translated!
    Bad           Good