banner_page

SN74ALVCH16841DLR

D-Type, Latch 1.65V~3.6V 10 Bits Tri-State Latches 74ALVCH Series 74ALVCH16841 56 Pins DUAL CMOS 56-BSSOP (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALVCH16841DLR
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 987
  • Description: D-Type, Latch 1.65V~3.6V 10 Bits Tri-State Latches 74ALVCH Series 74ALVCH16841 56 Pins DUAL CMOS 56-BSSOP (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Number of Pins 56
Weight 694.790113mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74ALVCH
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 1.65V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 1.8V
Terminal Pitch 0.635mm
Base Part Number 74ALVCH16841
Pin Count 56
Output Type Tri-State
Circuit 10:10
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 1.65V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 10
Propagation Delay 5.6 ns
Turn On Delay Time 1 ns
Family ALVC/VCX/A
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Prop. Delay@Nom-Sup 3.9 ns
Control Type ENABLE LOW/HIGH
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 20
Independent Circuits 2
Translation N/A
Height 2.79mm
Length 18.41mm
Width 7.49mm
Thickness 2.59mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ALVCH16841DLR Overview


In the 56-BSSOP (0.295, 7.50mm Width) package, it is embedded. As a result, it has a packaging of Tape & Reel (TR). Tri-State is used for the output it is configured with. In this electrical device, the logic type is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. A 1.65V~3.6V voltage supply is required for operation. There is -40°C~85°C operating temperature. An FPGA of this type belongs to the 74ALVCH series. The electronic part in this image has 10 bits. This device is designed with 56 terminations. The family it belongs to is 74ALVCH16841. In order to function, the supply voltage should be set to 1.8V. It is equipped with 56 pin count. It is part of the family of electronic devices called ALVC/VCX/A. The pin configuration of the device is 56. Surface Mount is used to mount this electronic part. As far as ports are concerned, this device has 2 ports. There is a subcategory of FF/Latches for this part. 3.6V is the maximum voltage (Vsup) that can be supplied. There are 3.3V power supplies attached to it. A supply voltage (Vsup) greater than 1.65V is required. It contains 20 input lines where electronic circuits are present. Based on its reliable performance, this device is appropriate for TR. With an output current of 24mA, it is highly flexible in terms of design. As its maximal power current (ICC) reaches 0.04mA, it is able to operate.

SN74ALVCH16841DLR Features


56-BSSOP (0.295, 7.50mm Width) package
74ALVCH series
10 Bits
74ALVCH16841 family
56 pin count
56 pins
3.3V power supplies

SN74ALVCH16841DLR Applications


There are a lot of Texas Instruments SN74ALVCH16841DLR Latches applications.

  • Shift left with parallel loading
  • Frequency dividing
  • Avionics
  • Shift Registers
  • Stacked or Push-Down Registers
  • Lamp and Display (LED)
  • PCs and Notebooks
  • Serial Output Data Queuing
  • Counter control
  • Double bus register system

Write a review

Note: HTML is not translated!
    Bad           Good