SN74ALVCH16903DGGR
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ALVCH16903 |
| Pin Count | 56 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Channels | 12 |
| Number of Circuits | 12-Bit |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 12 |
| Propagation Delay | 8.6 ns |
| Turn On Delay Time | 8.6 ns |
| Family | ALVC/VCX/A |
| Logic Function | Transceiver |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Universal Bus Driver |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 249.986095mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
SN74ALVCH16903DGGR Overview
The package 56-TFSOP (0.240, 6.10mm Width) contains this file embedded in it. Packaged in the manner of Cut Tape (CT). It achieves superior flexibility through 12-Bit circuits. As far as the logic type of this electrical device is concerned, it is Universal Bus Driver. There is an electronic part that is mounted in a Surface Mount-shaped arrangement. The operating temperature should be higher than 0°C~70°C. It features maximum design flexibility thanks to its High/Low output current. The 74ALVCH series contains this type of FPGA. 2.3V~3.6V is the supply voltage. The 74ALVCH16903 family includes it. It is also possible to terminate a transmission line with a 56 termination, which is where the transmission line is closed with a device that matches the characteristic impedance of the transmission line. Normal operation requires an output voltage above 3.3V. There are 56 pins on it. With 12 Bits, you can design electronic parts in a very flexible way. There are a number of termination types, including 2 terminations, which is the term that refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. Surface Mount is used to mount this electronic part. A 56-pin design is used. There is an electronic device in this family called ALVC/VCX/A. It reaches 3.6V when the maximum supply voltage (Vsup) is reached. A higher supply voltage (Vsup) should be used than the lower supply voltage (2.3V). 3.3V power supplies power it. It consists of 1 elements. As a result of the output current of 24mA, it provides maximum design flexibility in its design. 12 is growing/weakening in terms of channels.
SN74ALVCH16903DGGR Features
56-TFSOP (0.240, 6.10mm Width) package
74ALVCH series
74ALVCH16903 family
56 pin count
56 pins
3.3V power supplies
1 elements
SN74ALVCH16903DGGR Applications
There are a lot of Texas Instruments SN74ALVCH16903DGGR Universal Bus Functions applications.
- Instrumentation Systems
- Digital camera
- Push-button lock
- Small and medium distributed photovoltaic power generation system
- Square wave oscillators
- Memory
- In-vehicle system
- Troubleshooting & Judgment
- Digital Electronics
- Temperature detector circuits
