SN74ALVCH32374KR
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 174.20782mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| JESD-609 Code | e0 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 96 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 1.8V |
| Base Part Number | 74ALVCH32374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 250mA |
| Number of Bits | 32 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | Buffer, D-Type |
| Current - Quiescent (Iq) | 80μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 4.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height | 1.4mm |
| Length | 13.5mm |
| Width | 5.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74ALVCH32374KR Overview
The flip flop is packaged in 96-LFBGA. As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Tri-State, Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. Surface Mountis occupied by this electronic component. A 1.65V~3.6Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It belongs to the 74ALVCHseries of FPGAs. Its output frequency should not exceed 150MHz. In total, there are 4 elements. It consumes 80μA of quiescent Currently, there are 96 terminations. D latch belongs to the 74ALVCH32374 family. A voltage of 1.8V is used as the power supply for this D latch. The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. The electronic device belongs to the ALVC/VCX/Afamily. There is an electronic part that is mounted in the way of Surface Mount. This board has 96 pins. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. There are 32bits in its design. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. It is imperative that the supply voltage (Vsup) is maintained above 1.65Vin order to ensure normal operation. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. A power supply of 3.3Vis required to operate it. The flip flop has 2ports embedded within it. In order to operate, the chip has 8 output lines.
SN74ALVCH32374KR Features
Tape & Reel (TR) package
74ALVCH series
96 pins
32 Bits
3.3V power supplies
SN74ALVCH32374KR Applications
There are a lot of Texas Instruments SN74ALVCH32374KR Flip Flops applications.
- EMI reduction circuitry
- Instrumentation
- ESCC
- Balanced Propagation Delays
- Safety Clamp
- Shift registers
- Data Synchronizers
- Latch-up performance
- Computers
- Buffered Clock
