SN74ALVCH373DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Frequency | 10MHz |
| Base Part Number | 74ALVCH373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 3.6 ns |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVCH373DW Overview
There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). A package of Tube has been used. It uses Tri-State as the output. There is D-Type Transparent Latch logic type for this electrical device. The way in which this electronic part is mounted is Surface Mount. With a supply voltage of 1.65V~3.6V, it operates. During operation, the temperature is set at -40°C~85°C. An FPGA in this series belongs to the 74ALVCH family. It is designed with 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. There is no doubt that it belongs to the family 74ALVCH373. With the supply voltage set at 1.8V, it is able to operate. There are 20 pins on it. In the world of electronics, this electronic device belongs to the family of ALVC/VCX/A. Designed with 20 pins, it is compatible with a wide range of devices. Electronic parts are mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory FF/Latches includes this part. An electronic circuit can be found on 3 input lines. The output current of 24mA makes it feature maximum design flexibility. In order to operate properly, its maximum power current (ICC) should be 0.02mA.
SN74ALVCH373DW Features
20-SOIC (0.295, 7.50mm Width) package
74ALVCH series
8 Bits
74ALVCH373 family
20 pin count
20 pins
SN74ALVCH373DW Applications
There are a lot of Texas Instruments SN74ALVCH373DW Latches applications.
- Parallel data storage
- Double bus register system
- Counting
- Lamp and Display (LED)
- Automotive HEV/EV Powertrain
- Automatic test equipment
- Shift right with parallel loading
- Pseudo-random code generators
- Four-bit storage with output enable
- Counter control
