SN74ALVCH373PWRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 3.6 ns |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.02mA |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ALVCH373PWRE4 Overview
A package called TSSOP contains it. This package has the format of Tape and Reel. With this electronic part, there are 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The supply voltage of the device is 1.8V. The device is equipped with 20 pins. In the world of electronics, this electronic device belongs to the family of ALVC/VCX/A. The 20 pins are designed into it. The electronic part is mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to the subcategory of FF/Latches. It operates from 3.3V power supplies. Based on its reliable performance, this device is well suited to TR. The circuit's superior flexibility is achieved through the use of 8 circuits. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.02mA is needed for operation. In the low level output current, the value is set to 24mA. -24mA is set as the high level output current. The operating temperature should be lower than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. The supply voltage is limited to 3.6V. A voltage of 1.65V is the minimum supply voltage required for it to operate. It uses the logic IC BUS DRIVER. Its output current of 24mA ensures maximum design flexibility.
SN74ALVCH373PWRE4 Features
TSSOP package
8 Bits
20 pin count
20 pins
3.3V power supplies
SN74ALVCH373PWRE4 Applications
There are a lot of Texas Instruments SN74ALVCH373PWRE4 Latches applications.
- Bus system register with enable parallel lines at bus side
- Shift left register
- Storage
- Display
- Parallel-to-Serial Data Conversion
- Shift right with parallel loading
- Frequency
- Automotive Infotainment
- Display driver
- High-speed logic
