Parameters |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
20 |
Weight |
76.997305mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.65mm |
Pin Count |
20 |
Polarity |
Non-Inverting |
Power Supplies |
3.3V |
Temperature Grade |
INDUSTRIAL |
Number of Circuits |
8 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.65V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Current - Output |
24mA |
Number of Bits |
8 |
Propagation Delay |
3.6 ns |
Turn On Delay Time |
1 ns |
Family |
ALVC/VCX/A |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Max I(ol) |
0.024 A |
High Level Output Current |
-24mA |
Low Level Output Current |
32mA |
Independent Circuits |
1 |
Length |
6.5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SN74ALVCH373PWRG4 Overview
TSSOP contains it. A package of Tape and Reel has been used. With this electronic part, there are 8 bits. In this device, there are 20 terminations. The device works with a voltage of 1.8V for its supply voltage. It has 20 pins that makes it easy to use. ALVC/VCX/A is the family name of this electronic device. This board has 20 pins on it, which is what it is designed for. It is mounted according to the Surface Mount method. This device has a total of 2 ports. Subcategory FF/Latches includes this part. There are 3.3V power supplies attached to it. Considering the reliability of this device, it would be a good candidate for TR. The superior flexibility of this circuit can be attributed to the use of 8 circuits. In the low level output current, the value is set to 32mA. It is set to zero for the high level output current. Operating temperatures should be below 85°C. A temperature greater than -40°C should be used as the operating temperature. There is a maximum voltage of 3.6V supported. With a minimum supply voltage of 1.65V, it operates. There is a logic IC that it uses that is a BUS DRIVER. With an output current of 24mA, it is highly flexible in terms of design.
SN74ALVCH373PWRG4 Features
TSSOP package
8 Bits
20 pin count
20 pins
3.3V power supplies
SN74ALVCH373PWRG4 Applications
There are a lot of Texas Instruments SN74ALVCH373PWRG4 Latches applications.
- Pattern Generators
- Pseudo-random code generators
- Shift left register
- Digital bus buffer
- Control circuits
- Serial Output Register
- Bus system register with enable parallel lines at bus side
- Automotive HEV/EV Powertrain
- Hammer Device Information
- Sample and hold register