SN74ALVCH374DBR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCH374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3.6 ns |
| Turn On Delay Time | 1.1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.6ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| RoHS Status | ROHS3 Compliant |
SN74ALVCH374DBR Overview
It is embeded in 20-SSOP (0.209, 5.30mm Width) case. There is an embedded version in the package Tape & Reel (TR). There is a Tri-State, Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. A 1.65V~3.6Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. In FPGA terms, D flip flop is a type of 74ALVCHseries FPGA. You should not exceed 150MHzin its output frequency. The element count is 1 . This process consumes 10μA quiescents. The number of terminations is 20. The object belongs to the 74ALVCH374 family. The power source is powered by 1.8V. Its input capacitance is 5pF farads. An electronic device belonging to the family ALVC/VCX/Acan be found here. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. A total of 2ports are embedded in the D flip flop. This input has 3lines.
SN74ALVCH374DBR Features
Tape & Reel (TR) package
74ALVCH series
20 pins
SN74ALVCH374DBR Applications
There are a lot of Texas Instruments SN74ALVCH374DBR Flip Flops applications.
- High Performance Logic for test systems
- Instrumentation
- Modulo – n – counter
- Balanced 24 mA output drivers
- Automotive
- Reduced system switching noise
- Communications
- Counters
- Shift registers
- Synchronous counter
