SN74ALVCH374DWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCH374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3.6 ns |
| Turn On Delay Time | 1.1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 3.6ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVCH374DWR Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). It is included in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas its output configuration. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.65V~3.6V volts. It is operating at a temperature of -40°C~85°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74ALVCH series. There should be no greater frequency than 150MHzon its output. D latch consists of 1 elements. There is 10μA quiescent consumption. The number of terminations is 20. Members of the 74ALVCH374family make up this object. A voltage of 1.8V is used to power it. There is 5pF input capacitance for this T flip flop. An electronic device belonging to the family ALVC/VCX/Acan be found here. This electronic part is mounted in the way of Surface Mount. 20pins are included in its design. This device's clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The design is based on 8bits. Due to its superior flexibility, it uses 8 circuits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. This flip flop has a total of 2ports. A total of 3input lines have been provided.
SN74ALVCH374DWR Features
Tape & Reel (TR) package
74ALVCH series
20 pins
8 Bits
SN74ALVCH374DWR Applications
There are a lot of Texas Instruments SN74ALVCH374DWR Flip Flops applications.
- Memory
- Synchronous counter
- Bounce elimination switch
- Data transfer
- Counters
- Computing
- Parallel data storage
- Frequency division
- Common Clocks
- ESD performance
