SN74ALVCH374N
| Parameters | |
|---|---|
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3.6 ns |
| Turn On Delay Time | 1.1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 3.6ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 25.4mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVCH |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCH374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
SN74ALVCH374N Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. There is an embedded version in the package Tube. T flip flop uses Tri-State, Non-Invertedas the output. This trigger uses the value Positive Edge. Through Holeis positioned in the way of this electronic part. It operates with a supply voltage of 1.65V~3.6V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. The FPGA belongs to the 74ALVCH series. A frequency of 150MHzshould not be exceeded by its output. A total of 1elements are contained within it. Despite external influences, it consumes 10μAof quiescent current. The number of terminations is 20. You can search similar parts based on 74ALVCH374. The power supply voltage is 1.8V. This JK flip flop has a 5pFfarad input capacitance. A device of this type belongs to the family of ALVC/VCX/A. The electronic part is mounted in the way of Through Hole. There are 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. The design is based on 8bits. Using 8 circuits, it is highly flexible. A D flip flop with 2embedded ports is available. This input has 3lines in it.
SN74ALVCH374N Features
Tube package
74ALVCH series
20 pins
8 Bits
SN74ALVCH374N Applications
There are a lot of Texas Instruments SN74ALVCH374N Flip Flops applications.
- Latch
- Frequency Dividers
- Synchronous counter
- Clock pulse
- Consumer
- Computing
- ESD protection
- QML qualified product
- Patented noise
- Set-reset capability
