Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
80-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
80 |
Weight |
265.096391mg |
Operating Temperature |
0°C~70°C |
Packaging |
Cut Tape (CT) |
Series |
74ALVCHG |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
80 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.4mm |
Base Part Number |
74ALVCHG162280 |
Pin Count |
80 |
Number of Outputs |
32 |
Operating Supply Voltage |
3.3V |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
16 ~ 32-Bit |
Number of Ports |
3 |
Max Supply Current |
40μA |
Number of Bits |
16 |
Propagation Delay |
7.4 ns |
Quiescent Current |
40μA |
Turn On Delay Time |
9.5 ns |
Family |
ALVC/VCX/A |
Output Characteristics |
3-STATE WITH SERIES RESISTOR |
Current - Output High, Low |
6mA 6mA |
Logic Type |
Registered Bus Exchanger |
Number of Input Lines |
16 |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74ALVCHG162280GR Overview
As part of the 80-TFSOP (0.240, 6.10mm Width) package, it is embedded. In this case, it is packaged in the same way as Cut Tape (CT). The superior flexibility of 16 ~ 32-Bit circuits is achieved through their use. Logic type Registered Bus Exchanger is used on this electrical device. A Surface Mount-shaped electronic component is mounted here. It is better to have an operating temperature higher than 0°C~70°C. Due to its high and low output current options, 6mA 6mA's maximum level of flexibility is achieved when it comes to designing its features. It is a type of FPGA that belongs to the 74ALVCHG series of FPGAs. Using 3V~3.6V as a supply voltage, it operates. As it belongs to the 74ALVCHG162280 family, it should be taken into consideration. It is also possible to terminate a transmission line with a 80 termination, which is where the transmission line is closed with a device that matches the characteristic impedance of the transmission line. Normal operation requires an output voltage above 3.3V. 80 pins are present in the device. A 16-Bit electronic part was designed for this application. There are a number of termination types, including 3 terminations, which is the term that refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. In this case, the electronic part will be mounted in the Surface Mount-direction. It has 80 pins. This electronic device belongs to the family of ALVC/VCX/A. Upon reaching 3.6V, Vsup reaches its maximal value. There should be a greater supply voltage (Vsup) than 3V. There are 1 elements in it. Other Logic ICs includes this part. This electrical part operates from a supply voltage of 3.3V. A quiescent current 40μA is consumed without being affected by external factors. There are 32 outputs configured on it. A switching power supply has 16 input lines, which are electronic circuits connected to the ac mains and the rectifier input stage. When the maximal current supplied for the motor's operation reaches 40μA, it is considered to be operational.
SN74ALVCHG162280GR Features
80-TFSOP (0.240, 6.10mm Width) package
74ALVCHG series
74ALVCHG162280 family
80 pin count
80 pins
1 elements
32 outputs
SN74ALVCHG162280GR Applications
There are a lot of Texas Instruments SN74ALVCHG162280GR Universal Bus Functions applications.
- Automatic watering system
- Disk read-write IC
- Analog ICs
- Test and Measurement
- Ship
- Car refrigerator
- TTL (Transistor Transistor Logic) circuitry
- Electricity for military and civilian life in areas without electricity
- Automatic digital control circuits
- Street lights