Parameters |
Package / Case |
80-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
80 |
Weight |
265.096391mg |
Operating Temperature |
0°C~70°C |
Packaging |
Cut Tape (CT) |
Series |
74ALVCHG |
JESD-609 Code |
e4 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
80 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.4mm |
Base Part Number |
74ALVCHG162282 |
Pin Count |
80 |
Number of Outputs |
36 |
Operating Supply Voltage |
3.3V |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
18 ~ 36-Bit |
Number of Ports |
3 |
Max Supply Current |
40μA |
Number of Bits |
18 |
Propagation Delay |
7.4 ns |
Quiescent Current |
40μA |
Turn On Delay Time |
9.5 ns |
Family |
ALVC/VCX/A |
Output Characteristics |
3-STATE WITH SERIES RESISTOR |
Current - Output High, Low |
6mA 6mA |
Logic Type |
Registered Bus Exchanger |
Number of Input Lines |
18 |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
SN74ALVCHG162282GR Overview
The package 80-TFSOP (0.240, 6.10mm Width) includes it as part of its contents. Cut Tape (CT) is the way it is packaged. In order to achieve this superior flexibility, 18 ~ 36-Bit circuits are used. The Logic type of this electrical device is Registered Bus Exchanger. Surface Mount is pointing towards the electronic part. As far as the operating temperature is concerned, it should be higher than 0°C~70°C. Due to its high and low output current options, 6mA 6mA's maximum level of flexibility is achieved when it comes to designing its features. A 74ALVCHG series FPGA is a type of FPGA that is part of the family of FPGAs. Powered by 3V~3.6V, it operates on a voltage of V. It belongs to the 74ALVCHG162282 family. The 80 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. Normal operation requires an output voltage above 3.3V. There are a total of 96 pins on this device. 18 Bits were used in the design of this electronic part. The 3 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. In this case, the electronic part is mounted in the direction of Surface Mount. 80 pins are used in the design. It is a ALVC/VCX/A-family electronic device. When Vsup reaches 3.6V, the maximum supply voltage has been reached. In general, Vsup should be higher than 3V. An element of this system consists of 1 components. In Other Logic ICs, there is this part. There is a voltage of 3.3V applied to the supply voltage of this electrical part. It is in this case that 40μA of quiescent current is consumed without being affected by external factors in any way. The outputs are configured with 36. A switching power supply has 18 input lines, which are electronic circuits connected to the ac mains and the rectifier input stage. During the operation of this device, the maximum current that can be supplied reaches 40μA.
SN74ALVCHG162282GR Features
80-TFSOP (0.240, 6.10mm Width) package
74ALVCHG series
74ALVCHG162282 family
80 pin count
80 pins
1 elements
36 outputs
SN74ALVCHG162282GR Applications
There are a lot of Texas Instruments SN74ALVCHG162282GR Universal Bus Functions applications.
- Hair dryer
- General AND Logic Operation
- Reactive power compensation function
- Overcurrent/Short circuit protection
- Wearable Health and Fitness Devices
- Air conditioner
- Electronic and electrical project circuits
- Embedded system
- Test and Measurement
- Cell phone