SN74ALVCHR16269AGR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALVCHR |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ALVCHR16269 |
| Pin Count | 56 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 12 ~ 24-Bit |
| Number of Ports | 3 |
| Output Current | 12mA |
| Max Supply Current | 40μA |
| Number of Bits | 12 |
| Propagation Delay | 5.8 ns |
| Quiescent Current | 40μA |
| Turn On Delay Time | 8.1 ns |
| Family | ALVC/VCX/A |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | Registered Bus Exchanger |
| Number of Input Lines | 12 |
| Number of Output Lines | 24 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ALVCHR16269AGR Overview
It is embedded in the 56-TFSOP (0.240, 6.10mm Width) package. It is packaged in a way that resembles Cut Tape (CT). It achieves superior flexibility through 12 ~ 24-Bit circuits. A Registered Bus Exchanger is the logic type of the electrical device that we are discussing. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. The operating temperature should be higher than -40°C~85°C in order for the machine to function properly. In order to ensure maximum design flexibility, it features a High/Low output current of 12mA 12mA. FPGAs in the 74ALVCHR series are this type. The supply voltage is 1.65V~3.6V. It is a member of the 74ALVCHR16269 family. In 56 terminations, a transmission line is terminated with an impedance-matched device. As a rule of thumb, the supply voltage should be maintained above 1.8V to ensure normal operation. There are 56 pins on it. An electronic part designed with 12 Bits is used in this product. Transmission lines can be terminated with 3 terminations by using a device that matches the characteristic impedance. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. It has 56 pins. In the family of ALVC/VCX/A devices, this electronic device belongs. It reaches 3.6V when the maximum supply voltage (Vsup) is reached. 3.3V power supplies are used to power it. 1 elements are included in it. 12mA's output current allows it to be designed in a wide variety of ways. Other Logic ICs contains this part. It is in this case that 40μA of quiescent current is consumed without being affected by external factors in any way. Between the switching power supply and the AC mains are 12 input lines, which consist of an electronic circuit. During operation, its maximal current reaches 40μA.
SN74ALVCHR16269AGR Features
56-TFSOP (0.240, 6.10mm Width) package
74ALVCHR series
74ALVCHR16269 family
56 pin count
56 pins
3.3V power supplies
1 elements
SN74ALVCHR16269AGR Applications
There are a lot of Texas Instruments SN74ALVCHR16269AGR Universal Bus Functions applications.
- DVD
- Flip flops
- Illumination
- Fishery-optical complementary power station
- Grid adaptation function
- Small ground power station
- Range hood
- Residual current/leakage current protection
- Telecommunications
- Electric shaver
