SN74ALVCHR16269AL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ALVCHR |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCHR16269 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 12 ~ 24-Bit |
| Number of Ports | 3 |
| Output Current | 12mA |
| Number of Bits | 24 |
| Propagation Delay | 5.8 ns |
| Quiescent Current | 40μA |
| Turn On Delay Time | 8.1 ns |
| Family | ALVC/VCX/A |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | Registered Bus Exchanger |
| Number of Input Lines | 12 |
| Height Seated (Max) | 2.79mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ALVCHR16269AL Overview
As part of 56-BSSOP (0.295, 7.50mm Width), it is embedded. The package is packaged in the way that Tube would package it. In order to achieve the high level of flexibility that it possesses, 12 ~ 24-Bit circuits are used. This electrical device is of the Registered Bus Exchanger logic type. There is an electronic part that is mounted in a Surface Mount-shaped arrangement. -40°C~85°C should be higher than the operating temperature. As a result of 12mA 12mA's high and low output current capability, it offers the maximum amount of design flexibility. It is a type of FPGA belonging to the 74ALVCHR series. Powered by 1.65V~3.6V, it operates on a voltage of V. It is a member of the 74ALVCHR16269 family. In 56 terminations, a transmission line is terminated with an impedance-matched device. In order to maintain normal operation of the device, the supply voltage should remain above 1.8V. 56 pins are present in the device. 24 Bits were used in the design of this electronic part. It is possible to terminate a transmission line with a device that matches the line's characteristic impedance, known as 3 terminations. In this case, the electronic part will be mounted in the Surface Mount-direction. A 56-pin is used in this design. Devices in this family are known as ALVC/VCX/A devices. It reaches 3.6V when the maximum supply voltage (Vsup) is reached. Power is provided by 3.3V power supplies. There are 1 elements in it. Because of 12mA's output current, it is very versatile due to its maximum design flexibility. In Other Logic ICs, this part is included. External factors do not affect the amount of quiescent current consumed by it. A switching power supply has 12 input lines, which are electronic circuits connected to the ac mains and the rectifier input stage.
SN74ALVCHR16269AL Features
56-BSSOP (0.295, 7.50mm Width) package
74ALVCHR series
74ALVCHR16269 family
56 pin count
56 pins
3.3V power supplies
1 elements
SN74ALVCHR16269AL Applications
There are a lot of Texas Instruments SN74ALVCHR16269AL Universal Bus Functions applications.
- Disk read-write IC
- Photovoltaic system
- Projector
- Circuits involving computation and processing
- Telecommunications
- Induction cooker
- Street lights
- CMOS circuitry
- Small and medium distributed photovoltaic power generation system
- Remote monitoring
