Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Weight |
694.790113mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74ALVCHR |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Voltage - Supply |
1.65V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.635mm |
Base Part Number |
74ALVCHR16269 |
Pin Count |
56 |
Number of Outputs |
24 |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Number of Circuits |
12 ~ 24-Bit |
Number of Ports |
3 |
Number of Bits |
12 |
Propagation Delay |
5.8 ns |
Quiescent Current |
40μA |
Turn On Delay Time |
8.1 ns |
Family |
ALVC/VCX/A |
Output Characteristics |
3-STATE WITH SERIES RESISTOR |
Current - Output High, Low |
12mA 12mA |
Logic Type |
Registered Bus Exchanger |
Number of Input Lines |
12 |
Height Seated (Max) |
2.79mm |
Width |
7.49mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
SN74ALVCHR16269ALR Overview
Embedded in the 56-BSSOP (0.295, 7.50mm Width) package, it is used by many applications. In the way of Cut Tape (CT), it is packaged. In order to achieve this superior flexibility, 12 ~ 24-Bit circuits are used. Logic type Registered Bus Exchanger is used on this electrical device. This electronic part is mounted in the way of Surface Mount. Operating temperatures should be higher than -40°C~85°C. Featuring high and low output currents, 12mA 12mA offers maximum design versatility. An FPGA of this type belongs to the series 74ALVCHR and belongs to the category of FPGAs. The supply voltage for the machine is 1.65V~3.6V and it operates on that voltage. As it belongs to the 74ALVCHR16269 family, it should be taken into consideration. There is one type of termination that is called the 56 termination, which consists in terminating a transmission line with a device that has an impedance that matches the characteristic impedance of the line itself. When the supply voltage is above 1.8V, the device will operate normally. In addition, it is equipped with a 56 pin count. 12 Bits were used in the design of this electronic part. There are 3 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is mounted in the direction of Surface Mount. A 56-pin design is used. The electronic device in question belongs to the ALVC/VCX/A family of electronic devices. Upon reaching 3.6V, the supply voltage (Vsup) reaches its maximum value. 3.3V power supplies power it. An element of this system consists of 1 components. In Other Logic ICs, there is this part. The device consumes 40μA of quiescent current without being affected by external factors. A 24 output is configured on the board. In addition, 12 input lines are also available, which are made up of an electronic circuit connecting the AC mains to the rectifier input stage of the switching power supply.
SN74ALVCHR16269ALR Features
56-BSSOP (0.295, 7.50mm Width) package
74ALVCHR series
74ALVCHR16269 family
56 pin count
56 pins
3.3V power supplies
1 elements
24 outputs
SN74ALVCHR16269ALR Applications
There are a lot of Texas Instruments SN74ALVCHR16269ALR Universal Bus Functions applications.
- Electric shaver
- Data transfer
- Car
- Overcurrent/Short circuit protection
- Automatic watering system
- Digital Electronics
- Industrial Controls
- Test and Measurement
- Refrigerator
- Small ground power station