SN74ALVCHR16269AVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Weight | 145.007811mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALVCHR |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74ALVCHR16269 |
| Pin Count | 56 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Circuits | 12 ~ 24-Bit |
| Number of Ports | 3 |
| Number of Bits | 12 |
| Propagation Delay | 5.8 ns |
| Family | ALVC/VCX/A |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | Registered Bus Exchanger |
| Number of Input Lines | 12 |
| Height Seated (Max) | 1.2mm |
| Length | 11.3mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVCHR16269AVR Overview
A copy of it is embedded in the package 56-TFSOP (0.173, 4.40mm Width). Packaged in the manner of Cut Tape (CT). A 12 ~ 24-Bit circuit is used for achieving its superior flexibility as a result of its use of 12 ~ 24-Bit circuits. As far as the logic type of this electrical device is concerned, it is Registered Bus Exchanger. In this case, the electronic part is mounted in the direction of Surface Mount. A higher operating temperature than -40°C~85°C is recommended. Featuring high and low output currents, 12mA 12mA offers maximum design versatility. An FPGA of this type belongs to the series 74ALVCHR and belongs to the category of FPGAs. The voltage at which it operates is 1.65V~3.6V. The 74ALVCHR16269 family is comprised of it. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. For normal operation, the supply voltage must be kept above 1.8V in order for the device to function properly. It is equipped with 56 pin count. A 12-Bit electronic part was designed for this application. Termination with a 3 termination matches the characteristic impedance of the transmission line. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. It has 56 pins. The device belongs to the ALVC/VCX/A family of electronic devices. There is a maximum voltage supply (Vsup) reached when 3.6V is reached. There should be a difference between Vsup and 1.65V in the supply voltage. Power comes from a 3.3V source. Other Logic ICs includes this part. In addition, 12 input lines are also available, which are made up of an electronic circuit connecting the AC mains to the rectifier input stage of the switching power supply.
SN74ALVCHR16269AVR Features
56-TFSOP (0.173, 4.40mm Width) package
74ALVCHR series
74ALVCHR16269 family
56 pin count
56 pins
3.3V power supplies
SN74ALVCHR16269AVR Applications
There are a lot of Texas Instruments SN74ALVCHR16269AVR Universal Bus Functions applications.
- MPPT function (maximum power point tracking)
- Street lights
- Troubleshooting & Judgment
- Electronic and electrical project circuits
- Microcontrollers
- Networking
- Electric grinding wheel
- Electricity for military and civilian life in areas without electricity
- Digital system
- Roof distributed power station
