Parameters |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
BICMOS |
Voltage - Supply |
2.3V~2.7V 3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Base Part Number |
74ALVTH16373 |
Pin Count |
48 |
Output Type |
Tri-State |
Number of Elements |
2 |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Number of Ports |
2 |
Output Current |
32mA |
Max Supply Current |
3.2mA |
Number of Bits |
16 |
Propagation Delay |
4.9 ns |
Quiescent Current |
5mA |
Turn On Delay Time |
1 ns |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.064 A |
Control Type |
ENABLE LOW/HIGH |
Number of Input Lines |
3 |
Number of Output Lines |
1 |
Count Direction |
UNIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
12.5mm |
Width |
6.1mm |
Thickness |
1.15mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
48 |
Weight |
223.195796mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74ALVTH |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
SN74ALVTH16373GR Overview
In the 48-TFSOP (0.240, 6.10mm Width) package, it can be found as an embedded module. A Cut Tape (CT) package is used to package it. The output it is configured with uses Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. With a supply voltage of 2.3V~2.7V 3V~3.6V, it operates. There is a temperature of -40°C~85°C at which the system operates. In the 74ALVTH series, this FPGA is located. It is designed with 16 bits. A device with this design has 48 terminations. It is a member of the 74ALVTH16373 family. In order to function, the supply voltage should be set to 2.5V. 48 pins are provided. With the design of the board, there are only 48 pins. Surface Mount is used to mount this electronic part. This device is equipped with 2 ports. The part belongs to the FF/Latches subcategory. It contains 3 input lines where electronic circuits are present. Based on its reliable performance, this device is appropriate for TR. With 32mA, maximum design flexibility is ensured. Input lines are converted into binary equivalents by 1 output lines. As far as external factors are concerned, it consumes 5mA of quiescent current without getting affected by them. A total of 2 elements make up this object.
SN74ALVTH16373GR Features
48-TFSOP (0.240, 6.10mm Width) package
74ALVTH series
16 Bits
74ALVTH16373 family
48 pin count
48 pins
2 elements
SN74ALVTH16373GR Applications
There are a lot of Texas Instruments SN74ALVTH16373GR Latches applications.
- Parallel Output
- Parallel-to-Serial Data Conversion
- Parallel data synchronization
- Counting
- Serial Input
- General-Purpose Register
- Serial Output Register
- Up-Down Johnson
- Parallel data storage
- Buffer/Storage Registers