banner_page

SN74ALVTH16373KR

D-Type, Latch 2.3V~2.7V 3V~3.6V 16 Bits Tri-State Latches 74ALVTH Series 74ALVTH16373 56 Pins BOTTOM BICMOS 56-VFBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALVTH16373KR
  • Package: 56-VFBGA
  • Datasheet: PDF
  • Stock: 497
  • Description: D-Type, Latch 2.3V~2.7V 3V~3.6V 16 Bits Tri-State Latches 74ALVTH Series 74ALVTH16373 56 Pins BOTTOM BICMOS 56-VFBGA(Kg)

Details

Tags

Parameters
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology BICMOS
Voltage - Supply 2.3V~2.7V 3V~3.6V
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 240
Number of Functions 2
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74ALVTH16373
Pin Count 56
Qualification Status Not Qualified
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Number of Ports 2
Number of Bits 16
Propagation Delay 3.3 ns
Quiescent Current 3.2mA
Turn On Delay Time 1 ns
Logic Function D-Type, Latch
Current - Output High, Low 8mA 8mA
Logic Type D-Type Transparent Latch
Number of Input Lines 3
Independent Circuits 2
Number of Output Lines 1
Length 7mm
Width 4.5mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-VFBGA
Number of Pins 56
Weight 58.796911mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74ALVTH
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
Terminal Finish Tin/Lead (Sn/Pb)

SN74ALVTH16373KR Overview


In the 56-VFBGA package, it can be found as an embedded module. Packaged in the way of Cut Tape (CT). In this configuration, the output is set to Tri-State. This electrical device has the logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. A 2.3V~2.7V 3V~3.6V voltage supply is required for operation. There is a temperature of -40°C~85°C at which the system operates. The 74ALVTH series is associated with this FPGA. It is designed with 16 bits. This device has 56 terminations. As a member of the 74ALVTH16373 family, it falls under that category. With the supply voltage set at 2.5V, it is able to operate. 56 pins are provided. With the design of the board, there are only 56 pins. Mounting this electronic component follows the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part is in the FF/Latches subcategory. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. As a result of its reliable performance, it is well suited for TAPE AND REEL. 1 output lines provide binary equivalents of input lines. Aquiescent current is consumed by 3.2mA without being affected by external forces.

SN74ALVTH16373KR Features


56-VFBGA package
74ALVTH series
16 Bits
74ALVTH16373 family
56 pin count
56 pins

SN74ALVTH16373KR Applications


There are a lot of Texas Instruments SN74ALVTH16373KR Latches applications.

  • Watches
  • Audio and video switching
  • Shift register
  • Decade counting 7-segment decimal display
  • Relay replacement
  • Data acquisition
  • Control circuits
  • Storage
  • Serial Output Register
  • Shift right with parallel loading

Write a review

Note: HTML is not translated!
    Bad           Good