SN74ALVTH16821DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Termination | SMD/SMT |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVTH16821 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Max Output Current | 64mA |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Output Current | 32mA |
| Number of Bits | 20 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3.5 ns |
| Turn On Delay Time | 1 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 100μA |
| Current - Output High, Low | 8mA 24mA; 32mA 64mA |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 3.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.4 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVTH16821DL Overview
The flip flop is packaged in a case of 56-BSSOP (0.295, 7.50mm Width). The Tubepackage contains it. Tri-State, Non-Invertedis the output configured for it. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 2.3V~2.7V 3V~3.6Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74ALVTH series. It should not exceed 150MHzin its output frequency. There are 2 elements in it. It consumes 100μA of quiescent Currently, there are 56 terminations. The 74ALVTH16821family includes it. A voltage of 2.5V is used to power it. Its input capacitance is 3.5pF farads. There is an electronic part that is mounted in the way of Surface Mount. There are 56pins on it. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. The design is based on 20bits. The flip flop has 2embedded ports. With an output current of 32mA, this device offers maximum design flexibility. There are 1 output lines on it. 3input lines are available for you to choose from.
SN74ALVTH16821DL Features
Tube package
74ALVTH series
56 pins
20 Bits
SN74ALVTH16821DL Applications
There are a lot of Texas Instruments SN74ALVTH16821DL Flip Flops applications.
- Frequency Divider circuits
- Modulo – n – counter
- 2 – Bit synchronous counter
- Balanced 24 mA output drivers
- Clock pulse
- Counters
- CMOS Process
- Count Modes
- Differential Individual
- Safety Clamp
