SN74ALVTH16821GR
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ALVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ALVTH16821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 20 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3.5 ns |
| Turn On Delay Time | 1 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 100μA |
| Current - Output High, Low | 8mA 24mA; 32mA 64mA |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 3.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.4 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
SN74ALVTH16821GR Overview
In the form of 56-TFSOP (0.240, 6.10mm Width), it has been packaged. The Cut Tape (CT)package contains it. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. Powered by a 2.3V~2.7V 3V~3.6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. The 74ALVTHseries comprises this type of FPGA. Its output frequency should not exceed 150MHz. A total of 2elements are contained within it. There is 100μA quiescent consumption. Currently, there are 56 terminations. It is a member of the 74ALVTH16821 family. A voltage of 2.5V is used as the power supply for this D latch. This T flip flop has a capacitance of 3.5pF farads at the input. A part of the electronic system is mounted in the way of Surface Mount. The 56pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. There are 20bits in this flip flop. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. This D flip flop is equipped with 0 ports. Featuring the maximum design flexibility, it has an output current of 64mA . There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. A total of 3input lines have been provided.
SN74ALVTH16821GR Features
Cut Tape (CT) package
74ALVTH series
56 pins
20 Bits
SN74ALVTH16821GR Applications
There are a lot of Texas Instruments SN74ALVTH16821GR Flip Flops applications.
- Differential Individual
- Clock pulse
- Latch
- Balanced 24 mA output drivers
- Digital electronics systems
- Circuit Design
- Patented noise
- Frequency Divider circuits
- Convert a momentary switch to a toggle switch
- Computing
