SN74ALVTH32373KR
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 174.20782mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVTH |
| JESD-609 Code | e0 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 96 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVTH32373 |
| Pin Count | 96 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Propagation Delay | 3.3 ns |
| Quiescent Current | 3.2mA |
| Turn On Delay Time | 1 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Input Lines | 3 |
| Independent Circuits | 2 |
| Number of Output Lines | 1 |
| Translation | N/A |
| Height | 1.4mm |
| Length | 13.5mm |
| Width | 5.5mm |
| Thickness | 900μm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74ALVTH32373KR Overview
There is an embedded version of it in package 96-LFBGA. As a result, it has a packaging of Tape & Reel (TR). Tri-State is used for the output it is configured with. In this electrical device, the logic type is D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. The voltage supply is 2.3V~2.7V 3V~3.6V. There is a temperature of -40°C~85°C at which the system operates. An FPGA in this series belongs to the 74ALVTH family. 32 Bits are used in the design of this electronic part. As far as this device is concerned, it has no terminations. The family it belongs to is 74ALVTH32373. With a supply voltage of 2.5V, it operates. 96 pins are available on it. The pin configuration of the device is 96. A Surface Mount mounting method has been used for this electronic part. 2 ports are available on this device. In the subcategory Bus Driver/Transceiver, this part belongs. It contains 3 input lines where electronic circuits are present. Considering the reliability of this device, it would be a good candidate for TR. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. There are no external factors that affect it, so it consumes 3.2mA quiescent current. It achieves superior flexibility by using 4 circuits. A maximal power current (ICC) is generated for its operation at 5mA.
SN74ALVTH32373KR Features
96-LFBGA package
74ALVTH series
32 Bits
74ALVTH32373 family
96 pin count
96 pins
SN74ALVTH32373KR Applications
There are a lot of Texas Instruments SN74ALVTH32373KR Latches applications.
- Relay
- Registers
- General-Purpose Register
- Display driver
- Pattern Generators
- Parallel Input
- Serial Output Register
- Multistage ripple counting
- Digital bus buffer
- Counter control
