SN74AS158D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74AS158 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 5 ns |
| Family | AS |
| Number of Inputs | 8 |
| Current - Output High, Low | 400μA 8mA |
| Supply Type | Single |
| Bandwidth | 125MHz |
| Output Polarity | INVERTED |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AS158D Overview
Due to the lack of space on the board, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).Tube is the packaging method.digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC Multiplexer is used.The operating temperature will not be affected by external factors when turn signal switch is set to 0°C~70°C.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.Since they are members of the 74AS series, they can be used in a wide variety of applications.It is designed with 16 terminations as part of its basic configuration.The part number for 74AS158 can be used to find its logic switch related parts as well.The multiplexer is supplied with 5V voltage.This turn signal switch has 16 component pins.As a result, conductors end at GULL WING.In this case, the supply type is Single.The board is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the AS family.There are 2 bits in signal multiplexer.For mux switch's normal operation, power supply 5V is provided.This turn signal switch has 1 outputs designed for its operation.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.This multiplexer has a total of 8 inputs.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.
SN74AS158D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74AS158D Applications
There are a lot of Texas Instruments SN74AS158D Signal Switches / Multiplexers / Decoders applications.
- Data collection system
- Idle motor
- Combinational circuit
- Electronically controlled engine system
- Decimal decoder
- Data transfer
- Communication system
- VGA
- PCIe
- Data-routing applications
