SN74AS174DR
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 3.6 ns |
| Family | AS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 45mA |
| Current - Output High, Low | 2mA 20mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 45mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
SN74AS174DR Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. There is a Tri-State, Non-Invertedoutput configured with it. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Currently, the operating temperature is 0°C~70°C TA. D-Typedescribes this flip flop. It is a type of FPGA belonging to the 74AS series. Its output frequency should not exceed 100MHz. There are 1 elements in it. T flip flop consumes 45mA quiescent energy. 16terminations have occurred. The 74AS174 family contains this object. Power is supplied from a voltage of 5V volts. This D flip flop belongs to the family of AS. There is an electronic part mounted in the way of Surface Mount. This board is designed with 16pins on it. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). The supply voltage (Vsup) should be maintained above 4.5V for normal operation. The superior flexibility of this product is achieved by using 7 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. With an output current of 20mA, this device offers maximum design flexibility. It is designed with 2 output lines. 3input lines are available for you to choose from.
SN74AS174DR Features
Tape & Reel (TR) package
74AS series
16 pins
SN74AS174DR Applications
There are a lot of Texas Instruments SN74AS174DR Flip Flops applications.
- Power down protection
- Supports Live Insertion
- Balanced Propagation Delays
- Frequency Divider circuits
- Communications
- Storage registers
- Cold spare funcion
- Event Detectors
- Shift Registers
- Reduced system switching noise
