SN74AS174DRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Output Current | 20mA |
| Number of Bits | 6 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 3.6 ns |
| Family | AS |
| Current - Quiescent (Iq) | 45mA |
| Current - Output High, Low | 2mA 20mA |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 6 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
SN74AS174DRG4 Overview
16-SOIC (0.154, 3.90mm Width)is the packaging method. As part of the package Tape & Reel (TR), it is embedded. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at 0°C~70°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74AS series. It should not exceed 100MHzin its output frequency. The element count is 1 . Despite external influences, it consumes 45mAof quiescent current. There are 16 terminations,This D latch belongs to the family of 74AS174. A voltage of 5V is used as the power supply for this D latch. An electronic device belonging to the family AScan be found here. There is an electronic part mounted in the way of Surface Mount. This board is designed with 16pins on it. Its clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part with 6bits has been designed. It reaches the maximum supply voltage (Vsup) at 5.5V. A normal operating voltage (Vsup) should remain above 4.5V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. It offers maximum design flexibility with its output current of 20mA. There are 6 output lines in this JK flip flop.
SN74AS174DRG4 Features
Tape & Reel (TR) package
74AS series
16 pins
6 Bits
SN74AS174DRG4 Applications
There are a lot of Texas Instruments SN74AS174DRG4 Flip Flops applications.
- Latch-up performance
- Shift Registers
- Pattern generators
- Bounce elimination switch
- High Performance Logic for test systems
- Supports Live Insertion
- Shift registers
- ATE
- Single Down Count-Control Line
- Parallel data storage
