SN74AS250ADWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74AS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Data Generator/Multiplexer |
| Subcategory | Multiplexer/Demultiplexers |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS250 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 16:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 8 ns |
| Family | AS |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Supply Type | Single |
| Output Polarity | INVERTED |
| Max I(ol) | 0.048 A |
| Power Supply Current-Max (ICC) | 50mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 16 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74AS250ADWE4 Overview
This is a relatively small item of digital switch that is included in the 24-SOIC (0.295, 7.50mm Width) in order to save space on the board.The package is packaged in accordance with Tube.The method digital switch ic adopts for mounting is Surface Mount.In the multiplexers, the analog IC is indicated by Data Generator/Multiplexer.By keeping the operating temperature at 0°C~70°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.Since they are members of the 74AS series, they can be used in a wide variety of applications.The basic configuration includes 24 terminations.As its base part number is 74AS250, logic switch can also be used to find its related parts.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 24 is found on this turn signal switch.Conductors terminate at GULL WING in this design.In this case, the supply type is Single.It is configured with 24 pins.It is mounted in the way of Surface Mount.The logic switch belongs to the family of AS.Keeping Vsup at 4.5V will prevent some unwanted failures.The maximal supply voltage (Vsup) should be kept at 5.5V to avoid some unnecessary failures.A power supply is provided for mux switch's normal operation of 5V.In electronic terms, the digital switch ic is classified as part number Multiplexer/Demultiplexers.As a signal source, there are 16 output lines.
SN74AS250ADWE4 Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
16 output lines
SN74AS250ADWE4 Applications
There are a lot of Texas Instruments SN74AS250ADWE4 Signal Switches / Multiplexers / Decoders applications.
- LVDS
- To select different devices in microprocessor output
- Data transfer
- Textile mills
- Audio transmission
- To select different devices in microprocessor input
- Code converters
- Used to connect a single source to multiple destinations
- PCIe
- D/A converters
