SN74AS250ADWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Data Generator/Multiplexer |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS250 |
| Pin Count | 24 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 16:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 8 ns |
| Family | AS |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Supply Type | Single |
| Output Polarity | INVERTED |
| Max I(ol) | 0.048 A |
| Power Supply Current-Max (ICC) | 50mA |
| Number of Input Lines | 16 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74AS250ADWRG4 Overview
As a means of saving space, digital switch is provided in the 24-SOIC (0.295, 7.50mm Width).The package is in the form of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.For the analog part of the multiplexers, an IC Data Generator/Multiplexer is used.A temperature of 0°C~70°C will not leave the turn signal swturn signal switchch susceptible to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sIn addition to being a member of the 74AS series, these multiplexers have a wide range of applications.It is designed with 24 terminations as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74AS250.The multiplexer's system is powered by 5V volts.A component pin count of 24 is found on this turn signal switch.A conductor terminates at GULL WING.This supply type employs Single.Currently, it is configured with 24 pins.The mounting point is Surface Mount.The logic switch belongs to the family of AS.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4.5V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.The power supply of 5V is provided for mux switch's normal operation.As a result, the turn signal switch consists of 1 outputs.Part number Multiplexer/Demultiplexers indicates that the digital switch ic is an electronic part.The signal switching is packaged by TAPE AND REEL. On the multiplexers, 16 input lines are provided for accepting voltage levels.
SN74AS250ADWRG4 Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
16 input lines
SN74AS250ADWRG4 Applications
There are a lot of Texas Instruments SN74AS250ADWRG4 Signal Switches / Multiplexers / Decoders applications.
- LVDS
- A robotic vehicle with the metal detector
- Communication system
- D/A converters
- Idle motor
- Automatic health monitoring systems
- War field flying robot with a night vision flying camera
- A/D converters
- High-performance memory systems
- Automatic Monitoring systems
