SN74AS250ANT
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Type | Data Generator/Multiplexer |
| Terminal Finish | TIN LEAD |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| JESD-30 Code | R-PDIP-T24 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Circuit | 1 x 16:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Family | AS |
| Number of Inputs | 16 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Output Polarity | INVERTED |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
SN74AS250ANT Overview
For the purpose of saving board space, digital switch is included in the 24-DIP (0.300, 7.62mm).The package is in the form of Tube.Mounting is performed using Through Hole.the multiplexers uses an analog IC Data Generator/Multiplexer.By maintaining the operating temperature at 0°C~70°C, turn signal switch will not be affected by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Since they are members of the 74AS series, they can be used in a wide variety of applications.Among its basic features are 24 terminations.In multiplexer's system, 5V is the voltage supplied.A component pin count of 24 is found on this turn signal switch.The logic switch is a member of the AS family.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4.5V.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.The turn signal switch operates with 1 outputs.In this multiplexer, there is a total of 16 inputs.
SN74AS250ANT Features
Supplied in the 24-DIP (0.300, 7.62mm) package
SN74AS250ANT Applications
There are a lot of Rochester Electronics, LLC SN74AS250ANT Signal Switches / Multiplexers / Decoders applications.
- Logic gates for other digital devices
- Data communication
- Medical industry
- Paper plants
- Frequency multiplexing system
- Speed control of medern motors
- Code conversion
- Injectors
- Medium scale TV wall
- Telephone network
