SN74AS258N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74AS258 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 1.1W |
| Number of Bits | 2 |
| Propagation Delay | 5 ns |
| Family | AS |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Supply Type | Single |
| Bandwidth | 125MHz |
| Output Polarity | INVERTED |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AS258N Overview
Due to the fact that it is provided in the 16-DIP (0.300, 7.62mm), digital switch allows the board to be compacted.In this case, it is packaged as Tube.digital switch ic uses the method of Through Hole for mounting.In the multiplexers, the analog IC Multiplexer is used.The operating temperature will not be affected by external factors when turn signal switch is set to 0°C~70°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sSeveral applications are possible for 74AS series multiplexers.There is a design for terminating 16 as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74AS258.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch has 16 component pins.In this case, the supply type is Single.This multiplexer ic is configured with 16 pins.The multiplexer ic is mounted in the direction of Through Hole.The logic switch is a member of the AS family.Signal multiplexer provides 2 bits.It is provided that 5V has a power supply in order to function normally.The turn signal switch has 1 outputs.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.This multiplexer has 8 inputs.A total of 4 transmission channels are available in the turn signal switch's circuit.
SN74AS258N Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74AS258N Applications
There are a lot of Texas Instruments SN74AS258N Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- Communication system
- Implementing boolean functions with multiple variables
- Computer memory
- Idle motor
- Recording transmission
- Data bus control
- Automation system
- Signal router
- Enabling different rows of memory depending on address in memory chips
