SN74AS280NE4
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Arithmetic Circuits |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Current - Output | 20mA |
| Number of Bits | 9 |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Family | AS |
| Logic Function | Parity Gen |
| Output Characteristics | 3-STATE |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -2mA |
| Low Level Output Current | 20mA |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
SN74AS280NE4 Overview
It is a device supplied in the PDIP package. For its configuration, 14terminations are used. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. In all, there are 14 pins on each component. As [0], it is packaged. Circuit components are connected with 14pins. It is mounted using the way of [0]. In this case, it belongs to the family of [0]. In this device, there is information of 9bits. As far as Pbfree code is concerned, the result may be yes. The device has a temperature grade of COMMERCIAL. The voltage source generates 5Vvoltage. The device requires a supply voltage of [0]. Despite operating at 70°Cfor extended periods, its electrical characteristics remain stable. Generally, the temperature limit is set at 0°Cso it will operate over a specified range. There is a maximum voltage available for the device of 5.5V. There is a minimum voltage available for the device of 4.5V. In this case, the electronic components belong to the family of [0]. As a normal operating device, it has 1circuits. When a high-level voltage is applied to the output, there is -2mA current flowing into it. If a specified low-level voltage is applied to the output terminal, there is 20mA current flowing. In the output terminal, 20mA current flows.
SN74AS280NE4 Features
Embedded in the PDIP package
Operating supply voltage of 5V
SN74AS280NE4 Applications
There are a lot of Texas Instruments SN74AS280NE4 Counters & Dividers applications.
- Up Counters
- Dual Up Counters
- SQUARING
- Programmable decade counters
- Decade counter/decimal decode display (CD4017B）
- counting/frequency sy nthesizers-BCD output
- Fixed and programmable counters greater than 10
- Clocks
- LINEARIZATION
- Timing applications
