SN74AS286NE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Arithmetic Circuits |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 14 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Current - Output | 48mA |
| Number of Bits | 9 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 16.5 ns |
| Family | AS |
| Logic Function | Parity Gen |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Max I(ol) | 0.048 A |
| High Level Output Current | -15mA |
| Low Level Output Current | 48mA |
| Power Supply Current-Max (ICC) | 50mA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AS286NE4 Overview
It is a device supplied in the PDIP package. It is configured with 14terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. 1 elements are interconnected in wires. There are 14pins on all components. Rail/Tubeis the packaging method used for this package. In the circuit, 14pins are used to connect other components. The Through Holeway is used to mount it. It emerges as a member of AS family. There is information in the device in the form of 9bits. There is a temperature grade of COMMERCIALon this device. The voltage source produces a voltage of 5V volts. To operate, it requires a supply voltage of 5V volts. This device operates at 70°C°C for extended periods of time with acceptable electrical stability. An operating temperature range is specified with a lower limit generally set at 0°C degrees Celsius. There is a maximum voltage available for the device of 5.5V. It is possible to operate the device at as low a voltage as 4.5V. In this case, the electronic components belong to the family of [0]. At a high-level voltage specified, there is -15mA current flowing into the output. When a low-level voltage is specified, there is 48mA current flowing into the output terminal. 9 outputs is sent by the system. It is 48mAcurrent flowing to the output terminal.
SN74AS286NE4 Features
Embedded in the PDIP package
Operating supply voltage of 5V
SN74AS286NE4 Applications
There are a lot of Texas Instruments SN74AS286NE4 Counters & Dividers applications.
- TRUE RMS-TO-DC CONVERSION
- Decade counter/decimal decode display (CD4017B）
- SQUARING
- Binary counter/decoder
- Programmable decade counters
- ANALOG SIGNAL PROCESSING
- LINEARIZATION
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- Programmable binary and decade
