banner_page

SN74AS298ANSR

16 Terminations4.5V~5.5V 16 Pin 74AS298 Signal switch74AS Series 1 Outputs4 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AS298ANSR
  • Package: 16-SOIC (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 696
  • Description: 16 Terminations4.5V~5.5V 16 Pin 74AS298 Signal switch74AS Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.209, 5.30mm Width)
Number of Pins 16
Weight 200.686274mg
Operating Temperature 0°C~70°C
Packaging Cut Tape (CT)
Series 74AS
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Multiplexer
Packing Method TAPE AND REEL
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 4
Supply Voltage 5V
Base Part Number 74AS298
Pin Count 16
Number of Outputs 1
Circuit 4 x 2:1
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Power Dissipation 200mW
Number of Bits 4
Throw Configuration DPST
Propagation Delay 11 ns
Quiescent Current 22mA
Family AS
Current - Output High, Low 2mA 20mA
Supply Type Single
Max Frequency 62MHz
Power Supply Current-Max (ICC) 36mA
Number of Input Lines 2
Voltage Supply Source Single Supply
Independent Circuits 1
Width 5.3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AS298ANSR Overview


As a means of saving space, digital switch is provided in the 16-SOIC (0.209, 5.30mm Width).Cut Tape (CT) is the method used for packaging.Digital switch ic adheres to a mounting method of Surface Mount.For the analog part of the multiplexers, an IC Multiplexer is used.The operating temperature of 0°C~70°C will not be susceptible to external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74AS series are suitable for a wide range of applications.There is a design for terminating 16 as part of its basic configuration.There is a base part number 74AS298 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V volts.This turn signal switch has 16 component pins.It is the end of conductors that is represented by GULL WING.There is a type of supply of Single.With 16 pins, it is configured.The mounting is in the way of Surface Mount.There is a family of AS members.As a result, signal multiplexer provides a total of 4 bits.Keeping Vsup at 5.5V will prevent some unnecessary failures.Normally, 5V is powered by a battery.There are 1 outputs designed to operate the turn signal switch.In the absence of external influences, it consumes 22mA current of multiplexer ic.The signal switching is packaged by TAPE AND REEL. It is possible to accept voltage levels through 2 input lines of multiplexers.

SN74AS298ANSR Features


Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
2 input lines

SN74AS298ANSR Applications


There are a lot of Texas Instruments SN74AS298ANSR Signal Switches / Multiplexers / Decoders applications.

  • Data-routing applications
  • Solenoid cooling fan
  • D/A converters
  • Make full adder
  • GLAN
  • Automatic Monitoring systems
  • HD surveillance system
  • LVDS
  • High-performance memory-decoding applications
  • Electronically controlled engine system

Write a review

Note: HTML is not translated!
    Bad           Good