banner_page

SN74AS373DWR

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AS Series 74AS373 20 Pins DUAL TTL 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AS373DWR
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 836
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AS Series 74AS373 20 Pins DUAL TTL 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Series 74AS
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74AS373
Pin Count 20
Qualification Status Not Qualified
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 90mA
Output Current 24mA
Number of Bits 8
Propagation Delay 6 ns
Turn On Delay Time 6 ns
Family AS
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 15mA 48mA
Logic Type D-Type Transparent Latch
Number of Input Lines 8
Independent Circuits 1
Height Seated (Max) 2.65mm
Width 7.5mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

SN74AS373DWR Overview


A package called 20-SOIC (0.295, 7.50mm Width) contains it. As a result, it has a packaging of Tape & Reel (TR). It uses the output configuration Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. A voltage of 4.5V~5.5V is used as the supply voltage for this device. It is 0°C~70°C at the operating temperature. In the 74AS series, this FPGA is located. An electronic part with 8 bits is designed. In this device, there are 20 terminations that have been designed. It is a member of the 74AS373 family. With a supply voltage of 5V, it operates. The device is equipped with 20 pins. AS is the family of this electronic device. 20 pins are used in its design. Mounting this electronic component follows the Surface Mount method. 2 ports are available on this device. There is a subcategory of FF/Latches for this part. A total of 5V power supplies are needed to run it. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. This device is well suited for TAPE AND REEL based on its reliable performance. It features maximum flexibility in design due to 24mA output current. If you want to achieve high efficiency, make sure the supply voltage is at 5V.

SN74AS373DWR Features


20-SOIC (0.295, 7.50mm Width) package
74AS series
8 Bits
74AS373 family
20 pin count
20 pins
5V power supplies

SN74AS373DWR Applications


There are a lot of Texas Instruments SN74AS373DWR Latches applications.

  • Automatic test equipment
  • Parallel-to-Serial Data Conversion
  • Watches
  • Digital bus buffer
  • Motor Drives
  • Up/down difference counting
  • TV Set-top Boxes
  • Parallel data storage
  • Bus system register with enable parallel lines at bus side
  • Display driver

Write a review

Note: HTML is not translated!
    Bad           Good