SN74AS373N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | 74AS373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 90mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 6 ns |
| Quiescent Current | 65mA |
| Turn On Delay Time | 6 ns |
| Family | AS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AS373N Overview
20-DIP (0.300, 7.62mm) contains it. A package of Tube has been used. Tri-State is the output configured for it. This electrical device has a logic type of D-Type Transparent Latch. Mounting this electronic component follows the Through Hole method. It operates with a supply voltage of 4.5V~5.5V. It is 0°C~70°C at the operating temperature. In the 74AS series, this FPGA is located. There are 8 bits in this electronic part. A device with this design has 20 terminations. The family in which it belongs to is 74AS373. The device is operated when the supply voltage is set to 5V. There are 20 pins on it. AS is the family name of this electronic device. With the design of the board, there are only 20 pins. Mounting this electronic component follows the Through Hole method. 2 ports are available on this device. This part can be found within the FF/Latches subcategory. A total of 5V power supplies are needed to run it. Input Lines consist of electronic circuits, and there are 8. Its 24mA output current allows for maximum design flexibility. Optimal efficiency requires 5V as the supply voltage. The quiescent current consumed by it is 65mA because it is unaffected by external factors.
SN74AS373N Features
20-DIP (0.300, 7.62mm) package
74AS series
8 Bits
74AS373 family
20 pin count
20 pins
5V power supplies
SN74AS373N Applications
There are a lot of Texas Instruments SN74AS373N Latches applications.
- Automotive ADAS
- Lamp and Display (LED)
- Double bus register system
- Parallel Output
- Pattern Generators
- Up/down difference counting
- BCD counting
- Counter control
- Automatic test equipment
- Automotive HEV/EV Powertrain
