SN74AS373NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 90mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Family | AS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AS373NSR Overview
In the 20-SOIC (0.209, 5.30mm Width) package, it is embedded. Tape & Reel (TR) is the way it is packaged. It uses Tri-State as its output configuration. A D-Type Transparent Latch logic type is used in this electrical device. According to Surface Mount, this electronic part is mounted. There is no supply voltage for this device. During operation, the temperature is set at 0°C~70°C. An FPGA in this series belongs to the 74AS family. With this electronic part, there are 8 bits. This device is designed with 20 terminations. The family in which it belongs to is 74AS373. The device is operated when the supply voltage is set to 5V. With 20 pins, it is equipped. There is a device in this electronic family called AS. There are 20 pins on it. Mounting this electronic component follows the Surface Mount method. As far as ports are concerned, this device has 2 ports. Subcategory FF/Latches includes this part. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. A total of 5V power supplies are required for it to operate. (Vsup) should be greater than 4.5V. There are electronic circuits attached to the 8 input lines. On the basis of its reliability, this device is well suited for TR. With 24mA, maximum design flexibility is ensured.
SN74AS373NSR Features
20-SOIC (0.209, 5.30mm Width) package
74AS series
8 Bits
74AS373 family
20 pin count
20 pins
5V power supplies
SN74AS373NSR Applications
There are a lot of Texas Instruments SN74AS373NSR Latches applications.
- Counter
- Decade counting 7-segment decimal display
- Audio and video switching
- Relay replacement
- Flip-flops
- Communication systems
- Avionics
- Shift Registers
- Counter control
- Display driver
