SN74AS374DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AS374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Max Output Current | 48mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 48mA |
| Number of Bits | 8 |
| Clock Frequency | 125MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 3 ns |
| Family | AS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 120mA |
| Current - Output High, Low | 15mA 48mA |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AS374DW Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). As part of the package Tube, it is embedded. There is a Tri-State, Non-Invertedoutput configured with it. Positive Edgeis the trigger it is configured with. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. In the operating environment, the temperature is 0°C~70°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74ASseries contain this type of chip. A frequency of 125MHzshould be the maximum output frequency. D latch consists of 1 elements. It consumes 120mA of quiescent Terminations are 20. D latch belongs to the 74AS374 family. A voltage of 5V is used to power it. Electronic devices of this type belong to the ASfamily. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 20. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. An electronic part with 8bits has been designed. The superior flexibility of this circuit is achieved by using 8 circuits. The power supply is 5V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to achieve high efficiency, the supply voltage should be maintained at 5V. Featuring the maximum design flexibility, it has an output current of 48mA . 3input lines are available for you to choose from.
SN74AS374DW Features
Tube package
74AS series
20 pins
8 Bits
5V power supplies
SN74AS374DW Applications
There are a lot of Texas Instruments SN74AS374DW Flip Flops applications.
- High Performance Logic for test systems
- Counters
- Safety Clamp
- Modulo – n – counter
- Functionally equivalent to the MC10/100EL29
- Buffer registers
- Guaranteed simultaneous switching noise level
- Synchronous counter
- Storage registers
- Memory
