SN74AS4374BN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | DUAL-RANK FLIP-FLOP |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS4374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 48mA |
| Clock Frequency | 125MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 2 ns |
| Family | AS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 150mA |
| Current - Output High, Low | 15mA 48mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 25.4mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
SN74AS4374BN Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. As part of the package Tube, it is embedded. It is configured with Tri-State, Non-Invertedas an output. It is configured with the trigger Positive Edge. Through Holemounts this electrical part. A 4.5V~5.5Vsupply voltage is required for it to operate. 0°C~70°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. It is a type of FPGA belonging to the 74AS series. In order for it to function properly, its output frequency should not exceed 125MHz. In total, there are 1 elements. It consumes 150mA of quiescent current without being affected by external factors. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74AS4374 family. Power is supplied from a voltage of 5V volts. In terms of electronic devices, this device belongs to the ASfamily of devices. Electronic part Through Holeis mounted in the way. With its 20pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. As soon as 5.5Vis reached, Vsup reaches its maximum value. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. A power supply of 5Vis required to operate it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Featuring the maximum design flexibility, it has an output current of 48mA . A total of 3input lines have been provided. In addition, DUAL-RANK FLIP-FLOPis a characteristic of it.
SN74AS4374BN Features
Tube package
74AS series
20 pins
5V power supplies
SN74AS4374BN Applications
There are a lot of Texas Instruments SN74AS4374BN Flip Flops applications.
- Memory
- Matched Rise and Fall
- Supports Live Insertion
- Guaranteed simultaneous switching noise level
- Instrumentation
- Consumer
- Dynamic threshold performance
- Clock pulse
- Frequency Dividers
- Patented noise
