SN74AS4374BNSR
| Parameters | |
|---|---|
| Clock Frequency | 125MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 2 ns |
| Family | AS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 150mA |
| Current - Output High, Low | 15mA 48mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | DUAL-RANK FLIP-FLOP |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS4374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Output Current | 48mA |
SN74AS4374BNSR Overview
It is packaged in the way of 20-SOIC (0.209, 5.30mm Width). D flip flop is included in the Tape & Reel (TR)package. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. In the operating environment, the temperature is 0°C~70°C TA. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74AS series. It should not exceed 125MHzin terms of its output frequency. There are 1 elements in it. As a result, it consumes 150mA quiescent current and is not affected by external forces. A total of 20terminations have been recorded. This D latch belongs to the family of 74AS4374. The power supply voltage is 5V. In terms of electronic devices, this device belongs to the ASfamily of devices. Surface Mount mounts this electronic component. The electronic flip flop is designed with pins 20. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. It reaches the maximum supply voltage (Vsup) at 5.5V. For normal operation, the supply voltage (Vsup) should be above 4.5V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. An electrical current of 5V volts is applied to it. This D flip flop is equipped with 0 ports. In addition to its maximum design flexibility, the output current of the T flip flop is 48mA. A total of 3input lines have been provided. In addition, DUAL-RANK FLIP-FLOPis a characteristic of it.
SN74AS4374BNSR Features
Tape & Reel (TR) package
74AS series
20 pins
5V power supplies
SN74AS4374BNSR Applications
There are a lot of Texas Instruments SN74AS4374BNSR Flip Flops applications.
- Automotive
- Data Synchronizers
- High Performance Logic for test systems
- Buffered Clock
- Balanced Propagation Delays
- Count Modes
- Individual Asynchronous Resets
- Guaranteed simultaneous switching noise level
- ESCC
- Convert a momentary switch to a toggle switch
