SN74AS533ADWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS533 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 100mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 71mA |
| Turn On Delay Time | 5 ns |
| Family | AS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AS533ADWR Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. It is packaged in the way of Tape & Reel (TR). It is configured with an output of Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. It operates with a supply voltage of 4.5V~5.5V. The temperature at which the machine is operating is 0°C~70°C. There are a number of FPGAs in this series, including this one. The design of this electronic part contains 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. 74AS533 is the family name of it. In order to operate it, the supply voltage must be 5V. There are 20 pins attached to it. In the world of electronics, this electronic device belongs to the family of AS. The 20 pins are designed into it. Surface Mount is the way in which this electronic part is mounted. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This part can be found within the FF/Latches subcategory. Vsup reaches 5.5V as the maximum supply voltage. There is 5V power supply for it. It is recommended to have a higher supply voltage (Vsup) than 4.5V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. The 24mA output current gives it maximum design flexibility. There are no external factors that affect it, so it consumes 71mA quiescent current.
SN74AS533ADWR Features
20-SOIC (0.295, 7.50mm Width) package
74AS series
8 Bits
74AS533 family
20 pin count
20 pins
5V power supplies
SN74AS533ADWR Applications
There are a lot of Texas Instruments SN74AS533ADWR Latches applications.
- Avionics
- Pattern Generators
- Parallel Input
- Display
- Network Switches
- Parallel-to-Serial Data Conversion
- Buffer register
- General-Purpose Register
- Pseudo-random code generators
- Shift register
