SN74AS533ADWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS533 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 100mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 5 ns |
| Family | AS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74AS533ADWRE4 Overview
20-SOIC (0.295, 7.50mm Width) contains it. Tape & Reel (TR) is the packaging method. It uses Tri-State as its output configuration. This electrical device has a logic type of D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. A 4.5V~5.5V voltage supply is required for operation. The temperature at which the machine is operating is 0°C~70°C. The 74AS series contains FPGAs of this type. This electronic part is designed with 8 Bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to 74AS533 family. With a supply voltage of 5V, it operates. The 20 pind are equipped with it. AS is the family of this electronic device. In addition, it is designed with a pin number of 20. The electronic part is mounted using the Surface Mount method. This device has 2 ports. It belongs to the subcategory of FF/Latches. When Vsup reaches 5.5V, the maximal supply voltage is reached. There are 5V power supplies attached to it. A voltage greater than 4.5V must be supplied as a power supply (Vsup). Electronic circuits are represented by 8 input lines. As a result of its reliable performance, it is well suited for TAPE AND REEL. With an output current of 24mA, it is highly flexible in terms of design.
SN74AS533ADWRE4 Features
20-SOIC (0.295, 7.50mm Width) package
74AS series
8 Bits
74AS533 family
20 pin count
20 pins
5V power supplies
SN74AS533ADWRE4 Applications
There are a lot of Texas Instruments SN74AS533ADWRE4 Latches applications.
- TV Set-top Boxes
- Display
- BCD counting
- Shift register
- Parallel Input
- High-speed logic
- Serial Output Register
- Phase comparator
- Shift right with parallel loading
- Buffer Storage
