SN74AS573ADW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 1MHz |
| Base Part Number | 74AS573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 90mA |
| Output Current | 48mA |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Quiescent Current | 65mA |
| Turn On Delay Time | 6 ns |
| Family | AS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 93mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AS573ADW Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. Tube is the packaging method. The output it is configured with uses Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. A 4.5V~5.5V voltage supply is required for operation. A temperature of 0°C~70°C is used for operation. In the 74AS series, this FPGA is located. With this electronic part, there are 8 bits. A device with this design has 20 terminations. This type belongs to the 74AS573 family. With the supply voltage set at 5V, it is able to operate. It is equipped with 20 pin count. There is a device in this electronic family called AS. This board has 20 pins on it, which is what it is designed for. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports. There is a subcategory of FF/Latches for this part. It operates from 5V power supplies. It consists of 8 input lines from which an electronic circuit can be built. With 48mA, maximum design flexibility is ensured. A high efficiency supply voltage should be maintained at 5V. As far as external factors are concerned, it consumes 65mA of quiescent current without getting affected by them. Additionally, it is characterized by BROADSIDE VERSION OF 373. Its maximum current supply (ICC) reaches 93mA.
SN74AS573ADW Features
20-SOIC (0.295, 7.50mm Width) package
74AS series
8 Bits
74AS573 family
20 pin count
20 pins
5V power supplies
SN74AS573ADW Applications
There are a lot of Texas Instruments SN74AS573ADW Latches applications.
- Relay
- Parallel-to-Serial Data Conversion
- Parallel Input
- Serial Output Register
- Shift right with parallel loading
- Automotive Cluster
- PCs and Notebooks
- Parallel Output
- Hammer
- Frequency dividing
