banner_page

SN74AS573AN

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AS Series 74AS573 20 Pins DUAL TTL 20-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AS573AN
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 622
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AS Series 74AS573 20 Pins DUAL TTL 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Weight 1.1991g
Operating Temperature 0°C~70°C
Packaging Tube
Series 74AS
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature BROADSIDE VERSION OF 373
Subcategory FF/Latches
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 1MHz
Base Part Number 74AS573
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 90mA
Output Current 48mA
Number of Bits 8
Propagation Delay 8 ns
Quiescent Current 65mA
Turn On Delay Time 6 ns
Family AS
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 2.6mA 24mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 93mA
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 5.08mm
Length 24.33mm
Width 6.35mm
Thickness 4.57mm
Radiation Hardening No
REACH SVHC No SVHC

SN74AS573AN Overview


In the 20-DIP (0.300, 7.62mm) package, it is embedded. Packaged in the way of Tube. Tri-State is used for the output it is configured with. This electrical device has the logic type D-Type Transparent Latch. The electronic component is mounted according to the Through Hole method. There is no supply voltage for this device. A temperature of 0°C~70°C is used for operation. The 74AS series of FPGAs is the one this FPGA belongs to. Electronic parts with 8 bits are designed for this application. This device has been designed with 20 terminations available. There is no doubt that it belongs to the family 74AS573. In order to function, the supply voltage should be set to 5V. There are 20 pins attached to it. In the world of electronics, this electronic device belongs to the family of AS. This board has 20 pins on it, which is what it is designed for. Through Hole is the way in which this electronic part is mounted. This device has a total of 2 ports. This part is included in FF/Latches. There are 5V power supplies required for this machine to operate. Electronic circuits comprise 8 input lines. Its output current of 48mA ensures maximum design flexibility. High efficiency requires a supply voltage of 5V. Without external influences, it consumes 65mA quiescent current. There are also other characteristics of it, such as BROADSIDE VERSION OF 373. Maximum power supply (ICC) for its operation is 93mA.

SN74AS573AN Features


20-DIP (0.300, 7.62mm) package
74AS series
8 Bits
74AS573 family
20 pin count
20 pins
5V power supplies

SN74AS573AN Applications


There are a lot of Texas Instruments SN74AS573AN Latches applications.

  • Shift register
  • PCs and Notebooks
  • Shift right register
  • Parallel data storage
  • BCD counting
  • Parallel-to-Serial Data Conversion
  • Bus system register with enable parallel lines at bus side
  • Automotive Body Electronics
  • Communication systems
  • Up/down difference counting

Write a review

Note: HTML is not translated!
    Bad           Good