SN74AS576DWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AS576 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 48mA |
| Clock Frequency | 125MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 3 ns |
| Family | AS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 125mA |
| Current - Output High, Low | 15mA 48mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AS576DWE4 Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. T flip flop uses Tri-State, Invertedas its output configuration. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. A voltage of 4.5V~5.5Vis required for its operation. A temperature of 0°C~70°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. It is a type of FPGA belonging to the 74AS series. In order for it to function properly, its output frequency should not exceed 125MHz. The element count is 1 . As a result, it consumes 125mA of quiescent current without being affected by external factors. There are 20 terminations,D latch belongs to the 74AS576 family. Power is supplied from a voltage of 5V volts. ASis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. It operates from 5V power supplies. This D flip flop is equipped with 0 ports. High efficiency requires the supply voltage to be maintained at 5V. Featuring the maximum design flexibility, it has an output current of 48mA . The number of input lines is 3.
SN74AS576DWE4 Features
Tube package
74AS series
20 pins
5V power supplies
SN74AS576DWE4 Applications
There are a lot of Texas Instruments SN74AS576DWE4 Flip Flops applications.
- Counters
- Frequency Divider circuits
- Digital electronics systems
- ATE
- Single Down Count-Control Line
- Pattern generators
- Registers
- Consumer
- Shift registers
- Bus hold
