SN74AS74AN
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74AS74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Clock Frequency | 105MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 3 ns |
| Family | AS |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 16mA |
| Current - Output High, Low | 2mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
SN74AS74AN Overview
The item is packaged in 14-DIP (0.300, 7.62mm)cases. A package named Tubeincludes it. Differentialis the output configured for it. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of 0°C~70°C TAis used in the operation. This D latch has the type D-Type. It belongs to the 74ASseries of FPGAs. A frequency of 105MHzshould be the maximum output frequency. T flip flop consumes 16mA quiescent energy. There are 14 terminations,The 74AS74 family contains this object. An input voltage of 5Vpowers the D latch. Electronic devices of this type belong to the ASfamily. Through Hole mounts this electronic component. This board is designed with 14pins on it. A Positive Edgeclock edge trigger is used in this device. This part is included in FF/Latches. Using 2 circuits, it is highly flexible. A total of 5V power supplies are needed to run it. Optimal efficiency requires a supply voltage of 5V. It offers maximum design flexibility with its output current of 20mA. It is reported that there are 4 input lines.
SN74AS74AN Features
Tube package
74AS series
14 pins
5V power supplies
SN74AS74AN Applications
There are a lot of Texas Instruments SN74AS74AN Flip Flops applications.
- Divide a clock signal by 2 or 4
- Shift Registers
- Digital electronics systems
- Event Detectors
- ESCC
- Automotive
- Latch
- Consumer
- Single Down Count-Control Line
- Buffer registers
