SN74AS823ADWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS823 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 48mA |
| Number of Bits | 9 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 3.5 ns |
| Family | AS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 80mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Max Propagation Delay @ V, Max CL | 13ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74AS823ADWRG4 Overview
The package is in the form of 24-SOIC (0.295, 7.50mm Width). D flip flop is embedded in the Tape & Reel (TR) package. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis occupied by this electronic component. It operates with a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C TAis used in the operation. D-Typedescribes this flip flop. The 74ASseries comprises this type of FPGA. There are 1 elements in it. This process consumes 80mA quiescents. The number of terminations is 24. If you search by 74AS823, you will find similar parts. It is powered by a voltage of 5V . It belongs to the family of electronic devices known as AS. Surface Mount mounts this electronic component. Basically, it is designed with a set of 24 pins. It has a clock edge trigger type of Positive Edge. It is included in FF/Latches. It is designed with a number of bits of 9. 5.5Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 4.5V. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. The flip flop has 2ports embedded within it. With an output current of 48mA, it is possible to design the device in any way you want. It has 9 output lines to operate. WITH CLEAR AND CLOCK ENABLEis also one of its characteristics.
SN74AS823ADWRG4 Features
Tape & Reel (TR) package
74AS series
24 pins
9 Bits
SN74AS823ADWRG4 Applications
There are a lot of Texas Instruments SN74AS823ADWRG4 Flip Flops applications.
- Event Detectors
- Load Control
- Cold spare funcion
- Buffer registers
- Storage Registers
- Single Up Count-Control Line
- Registers
- Divide a clock signal by 2 or 4
- Set-reset capability
- Supports Live Insertion
