SN74AS825ADWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Additional Feature | WITH TRIPLE OUTPUT ENABLE; WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS825 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 48mA |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 3.5 ns |
| Family | AS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 73mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Max Propagation Delay @ V, Max CL | 13ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 90mA |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 62500000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74AS825ADWG4 Overview
It is packaged in the way of 24-SOIC (0.295, 7.50mm Width). The Tubepackage contains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis required for its operation. It is operating at 0°C~70°C TA. It belongs to the type D-Typeof flip flops. The FPGA belongs to the 74AS series. D latch consists of 1 elements. T flip flop consumes 73mA quiescent energy. A total of 24 terminations have been made. The object belongs to the 74AS825 family. A voltage of 5V is used as the power supply for this D latch. An electronic device belonging to the family AScan be found here. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 24 pins. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. It is designed with 8bits. Vsup reaches 5.5V, the maximal supply voltage. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. In order for the device to operate, it requires 5V power supplies. This flip flop has a total of 2ports. In addition to its maximum design flexibility, the output current of the T flip flop is 48mA. The JK flip flop is with 8 output lines to operate. Additionally, you may refer to the D latch's additional WITH TRIPLE OUTPUT ENABLE; WITH CLEAR AND CLOCK ENABLE.
SN74AS825ADWG4 Features
Tube package
74AS series
24 pins
8 Bits
5V power supplies
SN74AS825ADWG4 Applications
There are a lot of Texas Instruments SN74AS825ADWG4 Flip Flops applications.
- ESCC
- Individual Asynchronous Resets
- Counters
- Test & Measurement
- ESD protection
- Synchronous counter
- Latch
- 2 – Bit synchronous counter
- Balanced 24 mA output drivers
- Dynamic threshold performance
